Products

Cherry PCB Mount Screw-in Stabilizers are a type of stabilizer that is mounted directly into the PCB and attached with screws. This mounting style is considered the best because it provides a secur...

Cherry PCB-Mount Stabilizers are considered as one of the best type of stabilizers because they provide a secure and stable connection that is less likely to vibrate or loosen over time. This mount...

Cherry Plate Mounted Stabilizers are the most common mounting style, and they are typically found on almost all pre-built mechanical keyboards. These stabilizers attach to the metal plate inside th...

Style: Screw in Stabilizer PCB Mount 5 x pairs of housings in specified color 5 x pairs of stems in specified color 4 x 2u wires in specified color 1 x 6.25u wire in specified color 1 x7u wire i...

Gateron PCB Mount Screw-in Stabilizers v2 are a type of stabilizer that is mounted directly into the PCB and attached with screws. This mounting style is considered the best because it provides a s...

Style: Plate Mount Color: White 4 x 2U stabilizers 1 x 6.25U stabilizer. A 60% to 80% board typically needs x4 2u stabilizers and 1x 6.25u stabilizer.  Note: All photos were taken from the actua...

Krytox XHT-BDZ is a very high viscosity grease. It is recommended for use in lubricating stabilizer wires. Each jar of lubricant contains 5g or 10g of Krytox XHT-BDZ.  Note: All photos were ta...

Permatex Dielectric Grease is a great solution to lube your stabilizer's wire. It can reduce friction and make your stabilizers glide smoother. 9g of Dielectric Grease is enough to lube over ma...

Precision Snips Plier is a great tool for cutting stabilizer stem or switch pin. Made of high quality steel and it is not easy to break down. Material: Stainless Steel and PVC Size: 125 x 70 x 7...

Stabilizer Washers are used to prevent damage to your PCB and electrical short from metal-to-metal contact. Material: Fiber Color: Red Sold in packs of 20 Washers Note: All photos were taken fr...

Stabilizer Wire Balancing Tool is designed to help balance the wires which is an important task to avoid stabilizer rattle. Material: Stainless Steel Length: 80mm Note: All photos were taken fro...

Stabilizers Sticker effectively reduce the noise caused by the stabilizer making contact with the PCB. Material: Black - Teflon, Transparent - Silicone Thickness: 0.2 mm Compatible: Screw-in an...

A Syringe with Blunt Needle is a great tool for injecting lubricant into the stabilizer without removing and opening the stabilizer. 1ml syringe is the perfect size to save on lubricant and 0.73mm ...